Products Industrial Pumps

Our Products

SR Blower (2 Lobe)

The Adams Ricardo® SR blower range is based on five gear centre sizes from 70.5mm to 197mm with low, medium and high pressure models available throughout. Virtually any combination of airflow and pressure is available from 20 to 6200 m³/hr (10 to 3650 cfm) with a full 1.035 bar gauge (15psig) delivery pressure available at all flows up to 4620 m³/hr (2721 cfm).

View info on SR Blower (2 Lobe)

SR Vacuum (2 Lobe)

The Adams Ricardo® SR vacuum range is based on five gear centre sizes from 70.5mm to 197mm with low, medium and high pressure models available throughout. Virtually any combination of airflow and pressure is available from 20 to 6200 m³/hr (10 to 3650 cfm) with a full -500mbar pressure available at all flows up to 4620 m³/hr (2721 cfm).

View info on SR Vacuum (2 Lobe)

HE Blower (3 Lobe)

In their standard form the HE range of blowers are equip for the delivery of air up to a pressure of 1bar and a negative vacuum of 500mb abs. Special versions for the delivery of other gaseous media are also available upon request.

View info on HE Blower (3 Lobe)

HE Vacuum (3 Lobe)

The blowers in our new series are of the Roots type and incorporate a combination of all the advancements from previously produced blower types. This brings with it the knowledge and assurance that this new range of blowers uses the very latest designs and developments which have been gained by our continually improved product range.

View info on HE Vacuum (3 Lobe)

Screw Blower

The HS Screw Blower Range is available in 4 variants:

View info about our Screw Blowers

Vehicle Blowers

These blowers are mounted on lorries or trailers and used for pneumatic transport of granules, powders, meal and pollard etc. Mostly used in the agriculture, building and food industries, the required output capacity usually is within the range of 500-800 m3/h, and the operating pressure difference of up to 800 mbar.

View info on our range of Vehicle Blowers

Spares

Hadron holds various blower spares in stock, from bearings and seals to bearing housings and complete rotor assemblies. Hadron can provide a one stop shop for all your blower requirements.

View info on our range of available spares

Our Products All of our Air Blowers, Industrial Compressed Air Blowers and Package Sets are fully tested. View the full range >>>
Why should you consider Hadron Blowers & Pumps Why should you consider Hadron Blowers & Pumps
Hadron Blowers include
features such as...
  • Oil at both gear and drive ends,
    for ease of maintenance.
  • Cast iron, ribbed casings to
    ensure adequate heat dispersal
    & increased rigidity.
  • Easily accessible complete
    package units.
  • Dynamically balanced rotors
    which reduce vibration and noise.
  • Self tensioning belt drives,
    reducing wear & service times.
  • Easily accessible complete
    package units.
Request a quote