HE Blowing Set

HD Blowing Set

The standard packages cover a wider array of blowers than its smaller brother the compact range. Air flows are available from 20m3/h, all the way up to 20,000m3/h at pressures up to 1 bar.

The units incorporate a unique belt tensioning system, where the downward weight of the electric motor is used to apply the correct tension to the belt drives via a pivoting mounting plate. Using this method of automatic adjustment, maximum service life is achieved from the 'v' belts, and servicing times are reduced.

All packages can be supplied with an automatic safety/startup valve. This device acts as a pressure relief valve when the unit is running, and also as an unloading valve, venting the blowers air to atmosphere upon initial startup. This ensures the blower is never damaged due to startup under potential full line pressure.

The standard packages are available in both pressure and vacuum variations, with negative pressures down to -500mb. Vacuum units are supplied with under pressure safety relief valves, and use filter suction silencers on the intake side of the blower along with a non return flap valve to prevent back siphoning of air through the blower. The picture below shows an example of the standard vacuum package.

Basic Package Components

Additional Accessories

Our Products All of our Air Blowers, Industrial Compressed Air Blowers and Package Sets are fully tested. View the full range >>>
Why should you consider Hadron Blowers & Pumps Why should you consider Hadron Blowers & Pumps
Hadron Blowers include
features such as...
  • Oil at both gear and drive ends,
    for ease of maintenance.
  • Cast iron, ribbed casings to
    ensure adequate heat dispersal
    & increased rigidity.
  • Easily accessible complete
    package units.
  • Dynamically balanced rotors
    which reduce vibration and noise.
  • Self tensioning belt drives,
    reducing wear & service times.
  • Easily accessible complete
    package units.
Request a quote